Part Number: BF20-30

• Designed for use in larger homes.
• 110-115 Volts 60HZ 1 phaze.
• Read Product Specifications

Davey Pump Pressure Booster 20 GPM 30 PSI Boost 1 HP 115V #BF20-30 with flow control, are ideal for shower and irrigation boosting applications. They are not recommended for whole home applications. It requires a minimum of 20 psi inlet pressure for the flow control to operate

Applications:

• Shower boosting and irrigation applications only, they are not recommended for whole home applications.

Operation:

• When the flow is more than 1.2 GPM the pump will turn on and give up to an extra 38 PSI boost depending on the demand
• The pump will continue to run until the demand drops below 0.7 GPM
• If the main supply fails, the pump will stop.
• It will restart by itself when the city water pressure returns provided the flow is over 1.2 GPM

Specifications:

• Type of pump: Multiple stages ( 3 Impellers), self-priming centrifugal
• Pump construction: 304 Stainless steel and corrosion-resistant materials.
• Inlet & outlet: 1-1/4" FNPT X 1" MNPT(male pipe thread)
• Cut-in flow: 1.2 GPM
• Cut-out flow: 0.7 GPM
• Maximum operating pressure: Cannot exceed 100 PSI
• Tank size: None required
• Suction lift: Not capable of suction lift
• Maximum inlet pressure: 50 PSI (Must install a pressure reducing valve on the suction side of the pump if the inlet pressure is more than 50 PSI)
• Electrical: 115 volts, 1 phase, 10.0 Amps., 60 Hz, 1 HP, TEFC motor. Includes 6' electrical cord and plug
• Maximum allowable city pressure: 50 PSI
• Maximum water temperature: 150 degrees Fahrenheit
• Carton Dimensions: 14.54" high, 17.4" long, 7.85" wide.
• Weight: 38 lbs.

• Do not exceed a total system pressure of 100 PSI.
• The total system pressure will be the incomming city pressure plus the maximum output pressure from the data above.
• Use a pressure regulating valve in the suction and /or discharge lines as required.